On-the-edge-marketing Barstool Manuel d'utilisateur télécharger pdf

BARSTOOL ASSEMBLY INSTRUCTIONS

Step 1: Place the two legs together as

shown in the image above.

Step 2: Slide the ring over the legs and align the holes on the

ring with the holes on the legs. Slide the sleeved, allen head

screw into the hole and an allen head screw through the other

side and tighten down using the supplied allen wrenches.

Repeat for the other holes.

Step 3: Place the seat pad on a at stable surface with the

underside facing up. Turn the assembled legs and place it

on the underside of the seat pad. Align the holes in the legs

with the holes in the seat pad base. Using the supplied

machine screws or self-tapping screws secure the seat pad

to the legs.

For replacement parts or missing pieces, please do not return this product to the retailer. Call 949.305.4830 for free replacement parts.

If the stool legs are uneven insert a shim between

the foot pad and the barstool leg to level the barstool.

List of Contents

1 - (2) allen wrenches

2 - (4) sleeved allen head screws

3 - (4) machine screws or

self-tapping screws

4 - (4) shims

5 - (2) barstool legs

6 - (1) foot ring

7 - (1) seat pad

rev. 06-2008

Page 1

567OR1234BARSTOOL ASSEMBLY INSTRUCTIONSStep 1: Place the two legs together as shown in the image above.Step 2: Slide the ring over the legs and align

Pas de commentaire

On-the-edge-marketing Barstool Manuel d'utilisateur